Intake Fabrication
So, Nick got started on the intake manifold. The intake began life as a Kauffman sheet metal tunnel ram. We are using a 105mm Wilson throttle body so the two had to be mated and remain under the hood. First Nick cut off and squared up the ends of the plenum, then mocked up the throttle body where we wanted it and started to build to it.
__________________
1964 GTO
501, Edelbrock Heads NA, 3460 lbs.
9.76 @ 137mph
1971 Trans Am Lucy Blue, 11.56 @ 115
1966 LeMans. 6.0L LS single turbo, 8.85 @155 mph
1976 Trans Am twin turbo 462, SD Edelbrock heads 8.03@171 mph
2009 G8 GT
|