[moneypit]

I thought I would share the results on the new engine for my 37. Overkill in a few areas but the goal was to make 500 hp and tons of usable torque. I think it has lots of room to grow if I decide at some point to put more cam in. The converter in the 700R4 is only about a 2200 stall. I'm pretty happy with the results!

1976 455 block
Butler/Ross 467 stroker kit
HR 230/236 @ .050 510/520 lift w 1.5 rockers 112 LS
Butler Dport 87cc 310+cfm Edelbrock heads
Warrior tunnel ram with 2 1407 Edelbrock 750 carbs
Thorley 3 tube headers

I'm retiring in about 5 months so planning on some road trips in the near future!