Quote:
Originally Posted by nUcLeArEnVoY
I'm getting ready to install a FlowKooler 11-bolt. 
Hopefully I'll have better luck. I've done a lot of research and the worst case scenarios I've generally seen with it are that people see no difference in temps. My old water pump was a stamped impeller A-1 Cardone unit and the clearance was friggin' .200"!! So I know when I put on the flowkooler, ill see SOME change lol
Glad your problem has improved! |
the water pump to plate clearance should be adjusted by the plate itself, not how the water pump fits. meaning you could have fixed the .200 clearance, although the stamped impellers are not as good as the cast ones for longevity. even the cast impeller pumps can have different clearances that will need adjusted by bending the plate.