
10-06-2021, 08:55 PM
|
 |
Ultimate Warrior
|
|
Join Date: Jan 2005
Location: Springfield, Ohio
Posts: 1,329
|
|
Quote:
Originally Posted by 78w72
i may be a little out of touch too on prices for a complete 200r, havent checked the art carr site for a few years, looks like the 400hp is $2500 now & the 600hp is the added cost. as with anything in 2021, prices have increased a ridiculous amount, pre covid i bet the 400hp was a few hundred under 2k.
i did just have a th350c rebuilt locally in the last 2-3 years, called around to the big name trans shops, they wanted $600-$800, aamco being the highest & the others were bigger shops that have been around my town for 30-40 years. this is for a basic rebuild, no fancy race parts but included a name brand rebuild kit, 1yr warranty, with me bringing the trans to them. not sure how much more a 200r, 700r, or 4l60/80 would be.
im all for using the better trans if/when its needed. for this situation its going to be cruising around town & doing 70+mph commutes on the highway with 400hp . in this case the 200 would probably be the cheaper & easier install, i recall HPP was doing some articles on 200r swap & you could use a factory x/member, & maybe even the stock driveshaft, no trans tunnel mods & keep the factory shifter.
i fully agree any OD option will be expensive. in this situation, a cheaper & easier way by far would be to just change the rear gear, a 3.08 or 2.73 would be ok except for long interstate trips at 80+mph. & could keep the good th400.
|
I intend on taking long interstate trips and running the Silver State Classic with it. So I'll have to bite the bullet and spend the $$.
|