With all the modifications and upgrades to your engine management and also an increased amperage charging system I would think of putting in an upgraded system under the hood. I installed a fuse and relay panel. It is important to give good voltage to your fuel and ignition components as well as the starter solenoid upgraded. I also used relays to pull in the A/C horn and hi and low beams. I used the original wiring and switches to the relay box to energize and then ran new wire from the relay box to the individual components. I put a weather pack connector on the relay box in the event I need to repair or add additional wires etc. (no kit did it myself)
Paul
|