View Single Post
  #32  
Old 12-20-2021, 06:40 PM
Tom Vaught's Avatar
Tom Vaught Tom Vaught is offline
Boost Engineer
 
Join Date: Dec 2001
Location: The United States of America
Posts: 31,302
Default

Looks to me like Steve Linden matches everything I posted except for 1m FACT.
The rear wheel HP is not measured at the Axles/"Brakes" unless you take the tires and wheels off the vehicle. Tires do consume horsepower. A thing called rolling friction.
So the driveline has to include the tire contribution.

Emissions people (EPA and CARB) require on the track confirmation testing to assure the Coastdown) numbers used to dial in the dyno rolls matches the actual road measurements. I did Coastdown work for Ford and supplied the data under my name to the EPA as the "Coastdown Test Engineer".

I did the larger Trucks, F-150 thru F-350 vehicles and the Econoline vans.
Other Engineers did the Car platforms and the Small Truck and SUV type vehicles.

If the EPA/CARB was not happy with our numbers, they witnessed a reconfirmation of the track numbers. Most times it was vehicle to vehicle variability and the track numbers were the final numbers used.

So back on the HP numbers, Steve Linden is correct on 98% of his post.

Thanks Steve C for the link.

Tom V.

The AERO Contribution was confirmed at the Lockheed Wind Tunnel at Atlanta Georgia.

__________________
"Engineers do stuff for reasons" Tom Vaught

Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.