Quote:
Originally Posted by steve25
While we are handing out over due applause for killer Pontiac 350 motors let’s go back to 1974 and Burt Straus and his Sunbird that I saw run a 8.85 in the 1/4 mile early that Summer.
It was well worth my two flat tires that I had to deal with to get to Englishtown and see that take place!
|
Steve,
I saw Burt at Englishtown also (not sure what year). While he had to run factor iron heads, most of the ports (intake and exhaust) were nowhere the factory location That is what could seen just looking at the engine. Have no idea what one might have seen looking at the head from the combustion chamber side.
Stan
__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm