Quote:
Originally Posted by misterp266
Following as I will be using a Meziere remote pump on my build.
I was thinking of adding an 8AN bypass hose from the crossover to the pump inlet side. I’m using a Moon front cover. May also add a couple of small holes in the thermostat. I have read that Meziere pumps don’t like PWM controls and also should not be deadheaded. And as Steve stated, water should be circulating all the time to prevent hot spots.
|
Ya, I left my water bypass in use so the water does move into timing cover to pump. I have the thermostat removed as of now and well see how it works when weather changes here.
Right now I have plumbed back of heads to water crossover. I already have somewhat of a restrictor in place. I have an adapter plate on the crossover that divide the front and back water flow.
Adapter http://www.precisionautomotivespecia...Manifolds.html
__________________
68 Firebird. IA2 block, 505 cu in, SD Performance E-head, Solid roller 3600 weight. Reid TH400 3:90 gear. 28" slick.
Best so far 9.95@135 mph. 1.39 60 ft.
76 Trans am, TKX .81 o/d, 3.73 Moser rearend,
468 with KRE D-ports, Doug headers, 3" Exhaust
950 Quickfuel.
Last edited by chuckies76ta; 01-25-2022 at 09:28 PM.
Reason: add pic
|