Quote:
Originally Posted by sjdiesel
Thanks for the info guys. Has anyone has to run an 1/8” - 3/16” spacer under the frame side engine mounts to get better header to frame clearance?
|
I have the spacers installed, without them, there is no way these fit! I have to dent #6 tube this afternoon to have clearance to install the gasket!
I have all new poly bushings on frame and A arms. Also, frame isn't bent. Installing these have been a miserable experience!!
My original D567 from 1974 are 1 3/4" tubes and 3" collectors, and the #6 tube was changed on the newer set causing the fitment issue!!