Started the process of removing the transmission...those top bolts that hold the Magnum to the QT bell, especially the one offset to the right, are super difficult to access with the engine set back in the subframe. Removing the transmission mount gave my son just enough room to wiggle an 18" 3/8 extension through the shifter access panel we made. I thought the extension would snap, but he finally got it. With the transmission out I'll be able to make a little access panel for that bolt. I'll also clearance the area right behind the transmission so that I can get the back of the transmission up a little higher...just another .125" will make the angles perfect.
__________________
"If the best Mustang is the Camaro, the best Camaro is actually the Firebird" David Zenlea
|