I found some old .010 under bearings NOS federal Mogul "P" bearings because its Nodular and not forged (I'm going to do the thrust bearing mod too), if they are .003 clr, I'm going with it. I need to get the block tanked/cleaned. Even though its NOS, I'm still going to mag it, scuff the main line, change the cam bearings, replace freeze plugs, drill/tap the front galleys to 3/8 NPT, install the .030" hole dist. gear oiler galley plug, and hone the cyls for .005 clr. for those cast pistons. I will be using eagle H beams, press fit.
__________________
Jason
|