'67 GTO - Heater Fan Switch Issue
Hi guys. I'm trying to get the heater fan to work on my '67 GTO. I tore into it today and found what I hope is the solution. See attached photos.
The first photo shows the blower switch with what looks to be a missing 12 volt feed. If I'm reading it right, my wiring diagram shows that the feed should be a brown wire.
The second wire shows a "loose" DOUBLE brown wire with a connector that looks like it'll snap into place on the blower switch.
Can someone advise me whether this double wire belongs on the switch?
Any help is much appreciated.
Thanks
Don
|