Here’s a picture of a drive shaft I was doing compared to a natural steel header and looking at the
Welds before applying it. Sadly don’t have finished pictures of the shaft .
The others are photos I had of a firebird convertible from years ago how it was done back then.
Hard to get natural
Steel
To look
Like
Natural steel
Probably one of the hardest finishes to get right. iMO.
__________________
Happiness is just a turbocharger away!
960 HP @ 11 psi, 9.70 at 146.
Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug!
selling turbos and turbo related parts since 2005!
|