[roger1]

Originally Posted by MUSLCAH

To get that “Fat “ looking clear smooth....your first cut of the clearcoat should be 600 grit...then work your way up through the grits.

That's what a lot of the guys on the SPI forum say too. Starting with 600 scares me a bit though since I only put on 4 coats of clear. I reduced the clear 5% more in order to get it to lay a little more slick too. The instructions with these polycarbonate blocking tools from Linear say to start out with 800. I did a test with these blocks starting with 1000 using guide coat and it seemed to work well too.

Originally Posted by dataway

I've had Border Collies most of my life ... she's got the focused eyes.

Looking online at personality descriptions, I'd say she kind of fits a Border Collie a lot more than a Scottish Terrier. Could be another type of Terrier though but it must be a type with shorter legs. Maybe a Westie. Anyway, she seems to have the makings of turning out to be a great dog for us but right now her energy it sometimes is a bit exhausting.