View Single Post
  #3  
Old 01-27-2023, 12:08 PM
PAUL K's Avatar
PAUL K PAUL K is offline
Ultimate Warrior
 
Join Date: Feb 2004
Location: Sugar Grove IL USA
Posts: 7,441
Default

Quote:
Originally Posted by Dragncar View Post

How many other guys run a 8 second NA Pontiac with D ports ?
You indirectly implied Jim ran 8's in the quarter mile.

Quote:
Originally Posted by Dragncar View Post
I am thinking about a thread or post from not too long ago.


He did do the 320cfm pair of 48s that made 871 HP. Not sure if it had any power adder but you would think it could have.
You backed up your false statement, but implied maybe it was 8's with a power adder. Also blaming your incorrect post on brain fog.

Quote:
Originally Posted by Dragncar View Post
slowbird, I am simply thinking out loud , trying to figure who has done it. It has been done, iron heads in the 8s.
Now you say you never made an incorrect statement, because once somebody does run eights your false statement will become factual.


Quote:
Originally Posted by Dragncar View Post
Might have taken a light car, so what. The Butlers had some guy do it years ago with D ports;

Dan had a guy who could run 8.90s with his RAIVs a long time ago too..
Now your saying other guys (but not the guy you said) ran in the eights, so your false statement should really be considered accurate.... even though it was false.


Quote:
Originally Posted by Dragncar View Post
Jim has been 9.39 with 96s. That a pump gas head.
8s are possible with smaller chamber, more CR and lighten the car up. Or real close to it.
Now you are fantasizing about what someone else should do so you don't have to own the false post you made.

Quote:
Originally Posted by Dragncar View Post
But for some reason you want me to admit I am wrong.
^^^ THIS! Wouldn't it just be easier to own that you were wrong about Jim running eights.... Then you could apply all that waisted time towards getting your Hot Rod running so you don't miss another season of racing.... Just saying.

__________________
Go fast, see Elvis!
www.facebook.com/PaulKnippensMuscleMotors
The Following User Says Thank You to PAUL K For This Useful Post: