View Single Post
  #2  
Old 02-24-2023, 11:11 PM
Half-Inch Stud's Avatar
Half-Inch Stud Half-Inch Stud is offline
Ultimate Warrior
 
Join Date: Jul 2000
Location: BlueBell, PA or AL U.S.A.
Posts: 18,890
Default

Front cam bearing might take offence, might not.

As for the fuel pump eccentric; not worth filing hard steel. As or " Really loose" I forget. Loose sounds about right. think the cam end sticks out a little to assure the Stuck eccentric/Gear/cam nose are fully seated LOOSE eccentric spins loose.