Quote:
Originally Posted by Dragncar
If its drag radials Permatex # 1 is what you use. High Tack.
|
Yup this is what I used too. https://www.amazon.com/Permatex-8006...71699260&psc=1
But I also screwed mine (w the 4 speed naturally aspirated to the rims as well, that 60 ft was so important on that car.
My turbo car doesn’t hit the tires as hard so I haven’t run screws just the permeated and it’s been fine
__________________
Happiness is just a turbocharger away!
960 HP @ 11 psi, 9.70 at 146.
Iron heads, iron stock 2 bolt block , stock crank, 9 years haven't even changed a spark plug!
selling turbos and turbo related parts since 2005!
|