Quote:
Originally Posted by FrankieT/A
'71 Trans Am
6.0 LS
I'm using a Tanks Inc. tank (2 extra gallons) with 340 Walbro with an Aeromotive regulator w/ return at the tank. Victor Jr. intake w/Edelbrock fuel rails and Accufab 1200cfm TB. I have consistent 60psi at the rail.
I do have 1/2" fuel line from pump to rail, but that was from the 455 Poncho set up. I feel the 3/8" line would work just fine.
If you go with the Tanks Inc. set up use their floatless fuel sender, their universal one with the adjustable float is lets just say,... not good.
Walbro says right on their site NOT to use PWM with their pumps.
|
Thanks for the recommendation regarding which fuel sender to use.
There is a 340lph DCSS 39/50 turbine pump which they say is fine with PWM. The older gerotor style pumps are a no go.