Quote:
Originally Posted by Skip Fix
I do know I learned about them from one of my old NMCA buddies form Amarillo. He said the dyno shop up there kept one for SBC around and often it worked better in some of the SBC dirt track motors than whatever the owner was using.
|
I should not really blame the HEI design when the issue was a bunch of bad HEI Modules from the factory.
I had Proper Grease on the contact area for the HEIs each time that failed.
My "POTTED" SVO FORD MSD box has never failed me and is spot on for the RPM (once I surveyed a few MSD Chips and found ones that were same as the rpm range quoted).
Tom V.
Really do not care that it says "Ford Motorsports" on the outside of the part.