View Single Post
  #6  
Old 04-12-2023, 09:55 AM
Cliff R's Avatar
Cliff R Cliff R is offline
Ultimate Warrior
 
Join Date: Nov 2000
Location: Mount Vernon, Ohio 43050
Posts: 18,028
Default

It really doesn't matter. If you are using good parts as long as it doesn't get a dry-start you'll be fine. The amount of oil delivered to the cam lobes while the engine is running is amazing. They are basically flooded with oil continuously, so whatever you put on there is washed away a few seconds after start-up if not during the pre-lube procedure done prior to lighting it off for the first time......

__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),
The Following User Says Thank You to Cliff R For This Useful Post: