Quote:
Originally Posted by nas t eh
Fram still makes HP 4 and HP 1 racing filters. I just bought both a month ago.
HP4 is the same as HP2 but has a build in screened bypass that releases at 35psi.
HP 2 was designed originally for Pontiac, Olds and Buick that had bypass as part of the block/adapter housing while HP4 was originally for Chevrolet that does not have a bypass built into the motor and needs the filter to have the bypass.
So if you block the bypass on your Pontiac filter housing and run a Fram HP 4 racing filter you get a screen bypass that releases at 35 psi.
I went remote mount dual filter, so that meant HP 1 filters( Ford, Mopar) with 35psi internal filter screened bypass.
link to Fram racing filters below. if you check you find that the Fram Racing filters are a pretty good product.
https://www.fram.com/products/oil-filters/racing |
Not sure you can buy one at the moment. If you know of some place that has them in stock please post up a link.
I tried half a dozen sites, all out of stock. And even on Frams site it says "Use until inventory is depleted".
Looks like its being discontinued to me.
The HP2 is the filter for say a 63 Catalina, big car. I found out about Wix,s 1049 after their part number for 69 GTO 1258 was out of stock. Nappa had 1049 in stock, I looked at it and it was 1" longer. And I thought if it fit with my Hooker headers I would go with it. Just fit so that was what I used. Bigger filter= better, less by passing going on I thought.
So it looks like Fram will stop making the HP2 and go with the shorter HP5.
Does anyone know where the factory by pass starts to by pass ?
Now the K&P filter had a less than 1lb pressure drop in a Pro Stock engine in testing. I am sure they used very thin oil but with only 1lb pressure drop it would not by pass at all. K&P offers extremely high flow rate and by pass or no by pass options.
So plug your by pass and run their filter with a by pass built in and that would be IMO about as good as you can get for a spin on filter.
They even have Bobs The Oil Guy links on their site and mention some customers prefer using their filter combined with the by pass type of filters that Sirrotica recommends so highly.
So these guys know what they are talking about. Seem to cover all the bases.
Fram, looks like the HP5 is all we are left with.
https://kandpengineering.com/primer-on-filtration/