Quote:
Originally Posted by Cliff R
Here is my fix for the rubber rear seal leak problem.
I buy a sheet of cork gasket material and cut it precisely to fit with a razor knife. Never had one drop of oil get past this set-up. The factory rubber seals can and will leak or slip out on you. The wide custom fit cork seal isn't going anyplace.
Cliff
|
I need to resurrect this thread...
Cliff, do you double-up that cork gasket to get the needed thickness?
The cork sheets are 1/2 the thickness of the cork supplied in the Felpro gasket kits. And with the Butler 1-piece torqued down I still have a gap of about 7/32".
Do you glue the cork using silicone gasket maker, or some other glue like Gorilla Glue?
I realize the Butler 1-Piece is thicker than the Felpro black gasket and the Felpro cork gasket so that might explain the gap. (I have all 3 types at my disposal)