Great information on cutting an access hole with the hole saw. My question is location !
I have a 65 GTO. frame should be same for 64-66. The bolts on mine that are the problem are No. 5 and No. 6. That is the bolt at the top of the spring perch and the bolt at the back of the wheelhouse. Has anyone got the measurements on where to drill for those two positions? I marked the centerline in the trunk and can measure outward from there, the problem is front to back as it is hard to transfer that linear measurement from the "O" line back to the mount position inside the car.
Thank you in advance.
Kevin
|