Not looking for major gains. Just realizing that the cam I have in it now is too small for my combo: Long-rod 461 CID, 10:1, TKO-600, 2.5" duals, shorty headers, 3.55 posi. Just changing out cam and lifters, no other mods. Complete rebuild in 2013, less than 5,000 miles on it. Running that dinky cam 4 degrees advanced with #45 small valve heads gave me 459 ft-lb at the rear wheels but only 260 hp. That was with a Quadrajet. Has a Sniper Quadrajet EFI now, but I need to finish a few things up before taking it back to the dyno.
Will most likely go with the Melling SPC-3: 224/236 @ 0.050, 110 lsa. Will run it straight up, realizing a torque loss and hp gain.
__________________
461 Stroker Built by Me - 
|