A cheap hack for the roller wheel if it is "squared off" at all is a standard skateboard wheel bearing, mine was and it caused what I would describe as a dead spot in acceleration so to speak as the pedal was pushed down and the wheel rolled along the pedal it would hit the flat spot on the wheel for a split second before continuing on. Simple to do grind the rivet head off remove plastic wheel install bearing( is used loctite bearing retaining compound to hold in place no issues since) as mentioned before the rest can be purchased.
__________________
65 LeMANS , SD performance 462ci Engine, Tremec TKX 5 speed with a 3.73 geared 8.5" 10 bolt
|