'66 Tri-Power with Vacuum Linkage, Automatic
I'm building a '66 Tri-Power for an automatic GTO. I have all the components, but do not know which bracket is used on the center carb throttle lever--the bracket that actuates the kickdown switch.. As you know, there were many different styles used through the years. I believe the '66's used the same bracket as '64 & '65, but I want this to be correct.
If anyone has a photo of a correct '66 setup, I'd appreciate your sharing. Here ar the carbs after assembly, before mounting the vacuum switch, kickdown switch, vacuum diaphram, etc. I will post pictures after this is all in place.
__________________
BONESTOCK GOATS
'64 GTO Tripower Hardtop (Wife's Car)
'64 GTO Tripower Post Coupe (My Car)
'99 Bonneville SE Sedan
Last edited by Dick Boneske; 06-23-2023 at 10:51 AM.
|