It’s a bummer, but if this is the worst problem I have with this build, I’m ok with that. Pulling the engine will give me a chance to look at how things are wearing too.
It’s a weekend job to pull and reseal. Parts are cheap considering what I’ve put into this thing. I just want to make sure it’s going to seal!
__________________
Ken
'68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac ( build thread | walk around)
'74 Ventura 350
'69 AMC Javelin SST
|