If you use a rolling pin, I definitely didn't pack it well enough. IIRC, I used a big socket to press it in place.
I didn't fill the holes in the block or the cap. I actually made sure to remove all the RTV that was there from the previous two piece installation. I thought you were supposed to leave the holes for a graphite seal so it can grab and fill them for the one and two piece?
__________________
Ken
'68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac ( build thread | walk around)
'74 Ventura 350
'69 AMC Javelin SST
|