Got the measurements:
44.5" at the centerline of the rear bolt holes where they contact the sway bar spacers. To fit properly the bar should have been 45.5" to omit spacers (additional 1/2" per side).
Bolt centerlines on both sides were 5-7/8". I really tried to stretch the tape to get an even six inches but no dice. The swaybar holes were simple 1/2" holes with no slotting so I just C-clamped the bar in place and drilled through the control arms.
__________________
Mick Batson
1967 original owner Tyro Blue/black top 4-speed HO GTO with all the original parts stored safely away -- 1965 Catalina Safari Wagon.
|