Ok, I am strapped in Sam, so let’s have a good look.
May I recommend to you doing this.
Without taking the heads apart pour some synthetic oil down into each intake port and rock the head around to coat the whole seat area of the valve bowl.
Where doing this just to seal that area so we can pour in Alcohol.
Next set the head up in a position such that the intake flange is basically level.
Now fill the port up with rubbing Alcohol that you have colored up some with India ink or red or blue layout dye.
Now look for leaks into those 4 darn head bolt
holes .
It might be better to pick up a gallon of Lantern Alcohol since you may need near 2000 CCs of the stuff.
Be real careful with this stuff, treat it as if you where working with the fumes from gasoline!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
Last edited by steve25; 07-04-2023 at 06:46 AM.
|