Quote:
Originally Posted by drewm
My plan is to use it much like I was going to use the skin. Cut below the body line from the jamb to the tail panel and weld it in. So really nothing on the top part of the quarter, that will be the original panel. I know it is not ideal with such a long weld line, but my options are limited. At least with the full quarter, I am hopeful that things will line up and look correct. The skin wasn't even close.
|
Use as much of the original panel as possible. You have a good plan going below the body line. Might consider using a pro body man with access to a planishing tool and have him take the full quarter off before doing the cutting/welding. Might seem like MORE work that way, but better results in the end. Ask me how I know!