View Single Post
  #16  
Old 07-28-2023, 06:55 AM
Cliff R's Avatar
Cliff R Cliff R is offline
Ultimate Warrior
 
Join Date: Nov 2000
Location: Mount Vernon, Ohio 43050
Posts: 18,153
Default

Was talking to Brent last night about rebuild and tuning parts for another carb build so asked him a little bit about the car.

Race weight on the starting line 3460lbs.

Rear gear is 4.56.

Tires are 29" tall.

Converter is ATI about 4800 flash stall.

At the finish line w/o converter slip right at 6500rpm's.

Converter slip is apprx 4 percent. (I wouldn't touch than converter with a 200' pole!)

Heads are #48, hand ported to apprx 250cfm.

Flat top forged pistons with steel rods.

Cam is a older Comp 300B, 265/276 @ .050". LSA is 106, ICL 106........

__________________
If you can read this, thank a teacher. If you can read this in English, thank a Veteran!
https://cliffshighperformance.com/
73 Ventura, SOLD 455, 3740lbs, 11.30's at 120mph, 1977 Pontiac Q-jet, HO intake, HEI, 10" converter, 3.42 gears, DOT's, 7.20's at 96mph and still WAY under the roll bar rule. Best ET to date 7.18 at 97MPH (1/8th mile),