I would go with the Lunati 713 Hydraulic roller. It will match well with your head flow and compression ratio.
This would be a great street combo, and 600 HP is doable with your head flow and compression ratio. I would also use 1.65 Harland Sharp rockers.
You will really like this combo!!!
Lunati 20510713LUN
Dur @ .050 243/251
Gross valve lift 560/565 with 1.52 rockers
LSA 110 ICL 106
RPM 2600-6600
10:5.1 Compression needed and 3200 RPM stall needed
__________________
Pure Pontiac Power!!!  
Picture of my actual 69 Judge racing in 1970.
Rare Espresso Brown Ram Air III, 4 speed, manual steering with power disc brakes and factory build sheet indicating 4:88 special order rear axle.
|