View Single Post
  #86  
Old 08-09-2023, 09:27 AM
Stan Weiss's Avatar
Stan Weiss Stan Weiss is offline
Ultimate Warrior
 
Join Date: Jul 2013
Location: Philadelphia, PA
Posts: 5,341
Default

Quote:
Originally Posted by Jay S View Post
With too hot of a spark plug the HEI will compensate at lower RPMs buy reducing the dwell at lower RPMs. It will run fine at lower RPMs with too hot of a plug. Once you get above 2500 RPM an overly hot spark plug will fame out and do what you are describing on the secondary air door.

If you happened to retard the cam timing the colder spark plug will help some, but wouldn’t correct it. The pumping compression reported does not describe a cam timing problem. Double checking the cam timing is probably the next step I would do after trying a little colder spark plug.
Jay,
This is my feeling also. But since he only did a cranking test on 4 cylinders that is why I think he needs to do all 8. There is always the chance that in manufacturing some lobes got mis-machined.

Stan

__________________
Stan Weiss/World Wide Enterprises
Offering Performance Software Since 1987
http://www.magneticlynx.com/carfor/carfor.htm
David Vizard & Stan Weiss' IOP / Flow / Induction Optimization - Cam Selection Software
http://www.magneticlynx.com/DV
Download FREE 14 Trial IOP / Flow Software
http://www.magneticlynx.com/DV/Flow_..._Day_Trial.php
Pontiac Pump Gas List
http://www.magneticlynx.com/carfor/pont_gas.htm
Using PMD Block and Heads List
http://www.magneticlynx.com/carfor/pont_pmd.htm