Gotcha - I assume that’s your review in the link?
They are the Global West knock-offs that numerous vendors sell. My 64 Lemans has them courtesy of prior owner and the spacing issue you described is not the case with them -(see pic) - not sure what the deal is with yours. Perhaps they are defects?
I’m sure there are others on this site that have used them without fitment issues- in fact I believe Jlmounce installed a set in his wife’s Chevelle. Typically the complaint with these is the cheap ball joints and bushings. I put pro forged ball joints in mine since it didn’t require a whole lot of work.
__________________
Will Rivera
'69 Firebird, 400/461, 290 Eddy D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears
'69 LeMans Vert, XS 350, #47 heads, TH400, 10 Bolt 3.23 gears, work in progress
‘66 Lemans, 455, 310 KRE D-Ports, HR 236/245, TH400, GV OD, 12 bolt 3.73 gears - see it here:
https://youtu.be/RP_s1wJKm_Y?si=K0NZxoTyaGcj8Dcb
Last edited by grivera; 08-16-2023 at 09:52 PM.
|