[Stan65]

Frank,

It’s gonna be a slow process. The good news, the block and heads are crack free, and the block is gonna clean up at .035 over. Ordered an Eagle 4.250 rotating assembly. It’s still “supposedly” 3 weeks out. Will then finish home the block.

The bad news, the lead time on parts is ridiculous.

I have been talking to Lee. It sounds like the cam blanks are a long lead time also. I have a dreaded XR276HR I can use as mockup, but without the actual cam I am gonna run, I won’t have an actual base circle to work with.

I talked to the machine shop we use for my work, and they are on board for making them and getting the “hardness” correct.

Thanks for the interest, I’ll keep this thread updated with my progress.

Stan