You can’t just run unbaffled type valve cover breathers , for without a baffle under them you have a problem, especially if you have rockers blasting oil out right under those breather holes.
If you are running tall valve covers, rocker studs and lifts over .525” then it’s helpful gain the oil oil control and lift stability that a stud girdle offers.
If your running roller rockers then somewhat restricted push rods may be the way to go, also with a new motor your rings may not be fully seated yet making for blowby.
How is the tune in the motor and how do the plugs look.
If at full throttle the motor is detonating then that makes blowby due to unseating the rings.
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
Last edited by steve25; 09-19-2023 at 05:39 PM.
|