Quote:
Originally Posted by kingbuzzo
|
It was a battle, but I *think* I've finally conquered the seal (knock on wood).
What I learned is that the graphtite seal isn't as foolproof as it may seem. Then again, maybe I'm just a special level of fool LOL.
Given my experience, I wouldn't recommend installing any real main seal with a crank in place because of the cleaning and the prep required in the cap and the block. I'm sure it has be done successfully, just seems to add another layer of risk to a labor intensive procedure. You can't install the one piece with the crank in place anyway.
Lots of people say you can't use the Viton seal with serrated cranks, but Wade at BOP will tell you differently. The factory crank serrations are also way less aggressive than aftermarket cranks and more amenable to Viton. That said, I did have my Eagle crank polished down before I installed the one piece for insurance.
__________________
Ken
'68 GTO - 464 - Ram Air II heads - 236/242 roller - 9.5” TSP converter - Moser 3.55 Truetrac (
build thread |
walk around)
'74 Ventura 350
'69 AMC Javelin SST