Quote:
Originally Posted by 78w72
After all the cooling mods & now drilling the block for other cooling mods that shouldn't be required, it still runs hot or hotter than before even when temps are in the mid 70's?? Hope you can figure that one out...
One thing I noticed was in the handwritten documents. is that you claim/think shaving .010 off the heads has raised the compression from 10.75 to... 11.75, that is absolutely incorrect, might want to run the numbers on that again. .010 off the heads will only remove a couple CC's, which will raise the comp maybe a quarter of 1 point if that. The overheating issues are NOT related to .010 milled heads.
|
Good to know and I was not expecting this recent work to raise the Temps. So, the search continues, I have recently left my thoughts on the matter, please let me know what you think when you come across my theory, thank you in advance.