Your photo shows the rivet-on type with coloured vinyl insert. These are repro'd again but only in the black, you'd need to repaint the flexible vinyl insert that slides into the extrusions.
https://www.thepartsplaceinc.com/pro...-6-piece/83329
Here's the adhesive roll type 5/8" and 2 strips with pre-formed ends. Every time I look these up they are produced by someone with a new name. Was J.C. Whitney, then Trim-Gard. Black is standard, the colours come and go. This is the type that I showed in the diagrams where the door length is shown, each end on the fenders are somewhat custom and up to the one applying it. The rivet type lengths are already cut.
https://www.ebay.ca/itm/274657659351
https://cdn.dealeraccelerate.com/rkm...pecial-edition
https://cdn.dealeraccelerate.com/rkm...pecial-edition
And as mentioned, either could be installed on cars with this option, but came down to where and when they were installed.