Quote:
Originally Posted by steve25
After what you have listed as being checked there’s only 3 possibilities.
1) oil galley plug in the face of the block.
2) bad pump.
3) oil filter internally collapsed and blocking flow.
|
Thanks Steve. It’s actually down to two because not only did I change the filter, I changed the filter boss as well. Same outcome unfortunately. Good news is that the oil filter element was clean when I inspected it. I’m more than a little worried about the hft cam lobes though just because even under ideal conditions we all know how problematic they can be. I’m worried about that right side.
I have a new cam and lifters and a new 80 lb oil pump from Butler on my bench ready to go.
Sent from my iPhone using Tapatalk