Quote:
Originally Posted by Scarebird
I am impressed to say the least. I gather the Eddy distrbutor from their Pro-Flo 4 setup would work here too? Guys with the Eddy setup may be able to step up to forced air with your setup almost seamlessly.
Another thought is another lid may be able to work with the OEM shaker setup.
I made a dozen or so of those for LS3's so there is a small market there.
|
Yes, any full sequential port injection ECU will work, including the Edelbrock Pro-Flo 4. The Pro-Flo 4 distributor will work as well. The injectors in the units that are currently built are hidden under the blower in the valley. They are the “shorty” Bosch 14 mm tip injectors with the EV6 connectors.
For the longer injectors that may not fit under the blower, such as with the Pro Flo 4, I have provided another location on the riser that will accommodate virtually any injector.
Here you can see in the 3D printed mock-up the injector locations for this configuration.
The injector locations are machined into the castings to order, and you can have either location drilled. Or if a guy wants 16 injectors, that’s possible too.
It’s no problem to make a billet lid in any configuration you want, including a shaker style hood, but billet parts are not cheap.