Quote:
Originally Posted by Gach
Of course, I don’t know how many miles are on those pistons or what condition the cylinder walls are in. That’s something I would do is mic. the Pistons and check the bore. To see if just putting new rings will work.
|
Mikes reply:
In other Threads of mine this information is readily available, go to my name and press on it and the system will take you to all my input both in my own threads and others as well. If the thread is by Tradermike 2012 then I initiated the Thread in the first place. Other than that, I took over a few, not on purpose, I was learning PY forum 101.
The measurements we took were an inch from the top, middle and an inch short of the bottom, there was a slight difference and no scoring on the cyl. walls either, all in all, my first impression is one could just re-ring and change the Bearings, but we will prove that in a short time.
It is best to cruise my Threads for the information that I have provided, some will be in photos that I took of written notes that we wrote as we research and developed this ten-year project. I would not be surprised if I had 500 pages of these notes in my files at home. Forget about all the documents on my computer.
I was able to salvage, with the help of the forum, all the HO data lost when the servers were cleaned or purged of older data, to make room for the new. This is why I like to leave information in text on my threads, instead of leaving URL's, that get wiped out during one of these events and you don't when it's coming. Unfortunately, the forum does not agree with me on this issue.
We will provide more Info. as it is available, with actual photos to collaborate what I think vs actual factual measurements, that count.