Quote:
Originally Posted by Skip Fix
Some valve covers don;t have a baffle in the valve cover and I would worry they would suck oil without one.
|
Use a baffled PCV grommet and PCV valve in the valve cover.
If you're stuck on pulling the intake, I've never found it much of a challenge and no need for a separated crossover.
Pinch the upper rad hose close to the water neck, remove it from the water neck and secure the end higher than the rad outlet. Remove any coolant from above the Tstat in the water neck using a bulb-style battery filler and remove the water neck. Use the bulb battery filler to siphon the coolant from the crossover and remove the intake.
No spillage and will just cost you a new Tstat gasket.
