Quote:
Originally Posted by bhill86
If you remove everything including the turn aignal switch you’ll see those 3 big screws I’m talking about.
|
Saw those 3 screws under the t/s switch but didn't want to mess with them as I thought it may have loosened the top of the column. I also thought that back cover would just snap on and off with that top bowl still in place........at least that what it looks like after I removed the tilt lever.
Darned if I know what came out of place just pulling the t/s switch up a little to replace the ign cylinder but something did to not allow the dimmer switch to work.
I don't wanna go prying on that cover until I know for sure how it'll come off so any more help is appreciated. I have also heard the turn lever can be a booger to remove so I want to avoid that if possible.