i'm sure it's properly bled. The combo valve I bought is from Inline tube advertised for the aftermarket front disc upgrade with the hold-off and prop valve built in. The internal shuttle should be fine; i used the tool when bleeding and I have the electrical connection hooked up, showing no brake fault.
Perhaps I'm wrong saying that the fronts don't lock up.......... I tend to get off the brakes when the rears lock up and I get the annoying tire squeal so i probably have not REALLY tested them. My expectation is that they all should lock up at approx the same time.
george
__________________
"...out to my ol'55, I pulled away slowly, feeling so holy, god knows i was feeling alive"....written by Tom Wait from the Eagles' Live From The Forum
|