[HWYSTR455]

Ok, I remember better now, after I search for some pics. (attached)

From the connector where the rear harness plugs into, it runs down the inner wheel well, and into the gutter of the trunk drop off, then to the clip along the back of the trunk edge.

The driver's side bulb string drops down from the edge/clip to the outside of the car, and along the bottom of the tail light housing. There MIGHT be a couple clips that get captured by the stud/nuts of the tail light housing, a little foggy on that.

The rest of harness runs along the edge to the outside of the passenger tail light housing, drops down, and runs along the bottom of the passenger tail light housing.

The trunk mat covers the harness where it drops into the trunk drop off.

If you post in the 70-73 section, you will be flooded with a ton of specific info, to include build details from each assembly plant. Strongly suggest you post there.



.