Quote:
Originally Posted by PLongen
I would like to get a picture of the brackets, there's a picture of the brackets in the manual but doesn't show the pulley side.
|
I don't have a picture of the front bracket without the pulley in the way but you can see its general shape. Bracket is about 1/4" thick and has a jog to it. There is also a bracket to support back of pump. You need the correct ps pulley so it will line up with water pump pulley.
You would also need a PS center link, control valve, slave cylinder and hoses. A hole has to be made in fender well for the pump hoses to pass thru. Also need a bracket to mount slave cylinder to frame. A different pitman arm for ps also.
Your best bet is to find a junk 61-63 4-cyl. Tempest with power steering. There are rebuild kits readily available for the pump, control valve and slave cylinder as Corvettes used the same rebuild kits.