Quote:
Originally Posted by Baron Von Zeppelin
I'd do the 62 heads with a thicker gasket
Cam ,,, or 1.65 rockers on the stock cam.
Your 75 intake will work , you can put later intakes on earlier heads - no mods.
Also this is an ultra low mileage survivor car.
Engine should be pretty snug still.
|
The only mods so far were done by the previous owner. He did the exhaust(no cats), Installed a 72 factory intake and put 1.65 rockers on it.
I drove the car 125 miles yesterday and it runs great. I'll do the shaker modification and leave it alone for awhile while I work on my lemans I never realized how rich the lemans was running until I had the 75 TA to compare it to. After driving the TA and arriving at my destination and not smelling like fumes and exhaust I realized I've got some work to do with the lemans.
Previous owner told me the TA had a 3.08 rear. I haven't confirmed yet and PHS didn't list rear end either, unless I just didn't see it in the PHS packet.
One day I'll put the 62 heads on the TA as suggested by members.