Quote:
|
Instead of making new floor holes you could make some custom adaptor blocks for each location
|
I was going to make the adapter blocks as you mentioned, however, with using the furthest back mounts that are always below the seat the front bolt holes are out in front of the seat by 3 inches when seat is in nominal position. This means I would need to have the adapter below the carpet adapting rearward to the new track location. I believe it will be harder to line up all adapter holes and mounts with carpet installed.
I believe the front right mount will need a 1/2' spacer / shim and the rear mounts will need upwards of an inch. I believe I would need to still elevate more than just the thickness of adapter plates.
I am still in the trial fitment stage - so I may find that I need to change my approach once I get into it.
No holes have been drilled yet- I have to work on getting out a broken bolt first that the previous owner left for me.
I will know more as I measure 20 times to drill once.
Thank you